The electric system is the power unit of the paper machine while it is working. Simply put, it is the heart of the machine. How do we maintain the electric system of the paper machine? We recommend the following five measures:
(1) When starting, the voltage should meet the rated voltage. If the voltage is too high or low, it is not suitable to start the glue machine; the general voltage value is about 5 to 10% of the rated voltage.
(2) After the failure of the electric system of the laminating machine, the power must be cut off and cannot be used. At the same time, you should find a professional to repair, not to disassemble.
(3) should develop good habits, only the correct operation can reduce the probability of failure.
(4) Before starting the paper machine, check whether the machine rotates smoothly, whether it is stuck or blocked, and whether the belt connection is normal; if there is any abnormality, it is forbidden to continue to start the plastic machine.
(5) Clean up the dirt around the laminating machine, nearby debris, etc., and keep away from flammable and explosive materials.